Application form pdf duane reade

All things NFA

2010.11.29 14:36 Mr45 All things NFA

A community of hobbyists interested in NFA items, history, and news. We seek to expand general understanding of the laws collectively referred to as the National Firearms Act and their implications for gun owners and citizens of today. Silencer, SBR, SBS, DD, AOW, and MG posts are all welcome here. Content suggesting non-compliance or discouraging NFA ownership will not be tolerated.
[link]


2016.08.11 22:57 captain_deadfoot Access to Cannabis for Medical Purposes Regulations

A place to discuss the Access to Cannabis for Medical Purposes Regulations (ACMPR) in Canada.
[link]


2018.03.03 22:27 citizenglish mesmr

mesmr is a decentralized-secure media ecosystem bringing together the centralized media platforms of today into a singular source that can be interacted with and profited off of by anyone. mesmr makes the word “censorship" obsolete as the entire community decides what goes and what doesn't. Think of any form of media existing today; no matter what you think of, it can be housed on mesmr.
[link]


2024.05.15 13:01 MysilTech Intune Roles/RBAC

Hi, currently testing out Roles and RBAC in Intune and the goal is to have one user group that can manage policies with tag x, and another user group that can manage the default scope.
Using the built in roles for Policy and Profile manager + Application Manager works great. The profiles and apps that are tagged with 'x' are only available for the group with permissions.
However, if I try to add the built in Read Only Operator, all the profiles and apps becomes editable. The expected result would be that I could see all profiles/apps, but not edit those without 'x' scope tag.
Bug, or am I thinking/doing something wrong?
submitted by MysilTech to Intune [link] [comments]


2024.05.15 13:00 Aswinth_Raj Understanding the Versatility of the CH343: Applications, Design and Troubleshooting Tips

Understanding the Versatility of the CH343: Applications, Design and Troubleshooting Tips
The CH343 is a USB to high-speed serial UART converter chip designed to facilitate seamless conversion between USB and serial interfaces. It boasts enhanced data rates and supports multiple IO levels, including 5V, 3.3V, 2.5V, and 1.8V, making it an ideal choice for various electronic applications.
CH343
Design Considerations
  • Position the USB port in close proximity to the CH343 chip for efficient connectivity.
  • Ensure straight track routing for data lines and minimize the use of vias to maintain signal integrity.
  • Incorporate filter capacitors and maintain tight component placement to optimize performance.
Troubleshooting Tips
  • Check all connections between the CH343 chip and other components to ensure proper alignment.
  • Verify that the voltage levels of signals (TX, RX, etc.) are compatible with connected devices.
  • Test with different USB cables to rule out cable-related issues.
  • Select the correct baud rate and ensure proper settings for successful communication.
Troubleshooting Tips for Recognition Issues
Install the CH343 driver on your computer to facilitate proper recognition and communication.
Check for errors in the Device Manager, particularly in Windows environments, to address recognition issues.
Perform a loopback test by connecting the TX and RX pins of the CH343 chip to validate functionality.
The CH343 chip is utilized in diverse fields such as microcontroller programming, industrial control systems, and DIY electronics projects due to its seamless USB to UART conversion. Alternatives like CH340, FT230x, and CP2102 offer similar functionalities, providing options for various project requirements.
Mechanical drawings of the CH343, along with its dimensions, can be utilized for creating custom footprints for PCB or CAD modeling, ensuring seamless integration into electronic designs. For detailed technical specifications and mechanical drawings, refer to the CH343 datasheet available here.
submitted by Aswinth_Raj to components101 [link] [comments]


2024.05.15 12:59 Honeysyedseo The Cold Email Strategy That Transforms Losses into Profits

I got carried away at the blackjack table last night…
I put 10k on a hand and lost it all.
Only kidding, I’m not that much of a degenerate …
But if I was, here’s the step by step process I’d follow to make that 10k back
I've spent the past 3 years becoming a master at cold email & copywriting...
So I'd easily be able to turn around and sign 5 clients to get back to 10k/month.
Once you learn a skill, the hard part is done...
And you can find clients on command.
But if you're just starting out, the FIRST THING you need to do is learn a skill.
Whether that’s email marketing, cold email, ads, short form videos, TikTok, the list goes on…
Pick a skill you’re interested in and naturally talented in, and learn all you can about it.
If you have NO IDEA how to learn a skill
No worries...
I'll show you how later on in this post.
Keep reading.
Once you develop a baseline skill set, it’s time to form your offer and send some emails!
You’re probably thinking…
“What about my landing page, my VSL, my logo, etc…”
All of these things can be done AFTER your email campaigns are live.
For your offer, you’re gonna want some sort of guarantee or performance basis since you’re just starting.
Once you have your no-brainer offer, write some outreach scripts around your offer.
“Hey NAME, as the founder of COMPANY I’m sure you’re looking for more leads. Curious, would you be interested to learn how we can book you 10 calls each month or you don’t pay?” 
Once your scripts are done, get your leads list from ListKit, buy some domains, warm them up on Smartlead, and start sending emails!
While your campaigns are running, THEN you can build a landing page, record a VSL, and start growing your presence online (twitter, LinkedIn, YouTube)
After the first week or so, your first replies should start to come in.
When you’re handling cold email replies, the # 1 rule to keep in mind:
Get prospects booked in as few emails as possible.
If they ask for a call, ASK them what times work for them and book manually.
If they have a question, answer it briefly then push for a call.
As your cold emails get dialled in and you book your first few calls, you can put your focus towards taking the calls.
Since you're just starting out, I'd highly recommend working on some sort of performance basis, or offer a free trial.
You'll have a much easier time converting your first few deals and getting some experience under your belt.
Offers like
All will convert well on a sales call.
So you close your first deal…
Time to celebrate right?
Of course, but your work is just getting started.
Now it’s time to onboard your new client and leave a great first impression on them.
From here on out, you should be focused on 3 things:
  1. booking meetings
  2. closing deals
  3. fulfilling on your work.
To avoid a ton of headaches, cap your initial client base at ~5 clients and dedicate your full focus towards fulfilment.
With 5 clients, you should be able to hit that 10k MRR mark…
And make up for a terrible night at the blackjack table.
Hope this helped!
Be sure to join ColdEmailMasters for more value like this.
Source
submitted by Honeysyedseo to ColdEmailMasters [link] [comments]


2024.05.15 12:57 dediggefedde Best handling of PDF annotations

I use the kindle scribe to annotate A4-pdf files of scientific papers or student records. They often are densely written and without much margin.
Annotations work very well, using the send-to-kindle feature of the website. I can then read the pdf, make annotations and export back via e-mail to send my review or to make changes in LaTeX.
However, I encountered three problems with annotations:
  1. There is often not enough space to write text between lines or on the side. It would be great to increase margins or use the big blank space in the "note" view. At the moment, I add a margin with a pdf-tool efore sending the pdf to kindle.
  2. Annotations are difficult to see. Black annotations and grey highlights on black font is not easily visible. Color comes back to the pdf using the export-to-email feature, but since the layers are flattened, there is no list of annotations. I'm currently using the margin for a classical "" to indicates my annodation in the textline.
  3. I would like to combine sticky notes with handwritten annotations. Sometimes you want to give examples, references or explain something, and at other times you want to mark spelling mistakes or draw arrows. Currently, I make a footnote in the pdf and attach a textfile/comment to the E-Mail/folder for reviews.
Is there a better way with the kindle scribe to tackle these problems?
submitted by dediggefedde to kindlescribe [link] [comments]


2024.05.15 12:56 Euphoric_Ad859 Facing issue in powerapps(noobie here)

Hi everyone,
So my powerapps application is in manage and unmanaged solutions in production. It belongs to both. Now users are not able to run the power automate flow , it gives them the error that they don't have readAccess for the record with flow id.
First the error was different I gave them basic user role and then the error changed to readAccess one.
I wanted to know if I change the user role to Environment Maker will it work?
If this doesn't work then in security group I will give read access to organization under process table that is under customisation tab.
Can anyone help in this? Am I doing the right thing ?
submitted by Euphoric_Ad859 to PowerApps [link] [comments]


2024.05.15 12:53 Total-Mastodon-6888 Elevate Your Immigration Experience with Adric Immigration: Top Services in Bangalore

Are you considering making Bangalore your new home? Whether you're drawn to the city's vibrant culture, booming tech industry, or lush green spaces, immigrating to Bangalore can be an exciting and rewarding journey. However, navigating the immigration process can also be complex and overwhelming, especially if you're unfamiliar with the legal requirements and procedures. Top immigration services in Banglore
That's where Adric Immigration comes in – to provide you with top-notch immigration services tailored to your needs.
  1. **Visa Consultation and Assistance**:
    Obtaining the right visa is crucial for a smooth immigration experience. Adric Immigration offers comprehensive visa consultation services to help you understand your options and determine the most suitable visa category for your situation. Whether you're interested in a work visa, student visa, family reunification visa, or any other type of visa, our experienced consultants will guide you through the application process, ensuring that all requirements are met and paperwork is handled with precision.
  2. **Immigration Documentation**:
    The paperwork involved in the immigration process can be overwhelming, with countless forms, documents, and requirements to fulfill. Adric Immigration simplifies this process by providing expert assistance with documentation preparation. Our team ensures that all necessary documents are completed accurately and submitted on time, minimizing the risk of delays or rejections.
  3. **Legal Representation**:
    Navigating the legal complexities of immigration law requires expertise and experience. Adric Immigration boasts a team of knowledgeable legal professionals who stay updated on the latest regulations and policies. Whether you're facing challenges with your application or need representation in immigration proceedings, our legal experts are here to advocate for your rights and interests every step of the way.
  4. **Customized Solutions**:
    At Adric Immigration, we understand that every individual's immigration journey is unique. That's why we offer personalized solutions tailored to your specific needs and goals. Whether you're a skilled professional seeking employment opportunities, a student aspiring to study in Bangalore's prestigious institutions, or a family member looking to reunite with loved ones, we'll work closely with you to develop a customized immigration strategy that meets your requirements.
  5. **Post-Immigration Support**:
    Our commitment to client satisfaction doesn't end once you've obtained your visa. Adric Immigration provides comprehensive post-immigration support to ensure a seamless transition to life in Bangalore. From assistance with accommodation and settling-in services to guidance on healthcare, education, and cultural integration, we're here to support you every step of the way as you embark on this new chapter of your life.
Immigrating to Bangalore can be a life-changing experience, and with Adric Immigration's top-notch services, you can make the journey with confidence and peace of mind. Contact us today to learn more about how we can help you achieve your immigration goals and start your new life in Bangalore on the right foot.
submitted by Total-Mastodon-6888 to u/Total-Mastodon-6888 [link] [comments]


2024.05.15 12:52 JohnMarshallTanner A McCARTHYESQUE PAGAN PLATONIST INTERPRETATION OF THE COLDFORGER IN BLOOD MERIDIAN

Three main interpretations of BLOOD MERIDIAN have been the Gnostic, the Judeo-Christian and the Pagan Platonic. All three have a dividing line separating the Realm of God, or the Realm of Light from the this dark fallen material world in which the Judge or Devil is Archon. In the case of Plato, the Other Side is the realm or dimension of perfect forms.
Plato said that all things in this material world are imperfect copies of the perfect and eternal things in the realm of forms, and he used the example of the horse in his argument, one reason we might look at ALL THE PRETTY HORSES for this idea.
But let's stick first to the Coldforger in BLOOD MERIDIAN:
This other man he could never see in his entirety but he seemed an artisan and a worker in metal. The judge enshadowed him where he crouched at his trade but he was a coldforger who worked with hammer and die, perhaps under some indictment and an exile from men's fires, hammering out like his own conjectural destiny all through the night of his becoming some coinage for a dawn that would not be. It is this false moneyer with his gravers and burins who seeks favor with the judge and he is at contriving from cold slag brute in the crucible a face that will pass, an image that will render this residual specie current in the markets where men barter.
If McCarthy looks at Plato's perfect form realm, or dimension, as the sourse of the imperfect copies of all things including fire (which is where phosphorus comes in) in this material vale, then his metaphor of the Coldforger is the counterfeiter who passes those copies into this flawed world, allied with the Judge. If we look at this in terms of set theory, the master set is on the other side, and the copies slough off into this material world much the way that metaphors sloughed off from the original word, the original language. The Coldforger would then represent the transformer, the joker in the deck, the transfinite zero that shape-shifts copies between the dimensions.
I think that this was McCarthy's idea, though of course not his only idea, and I am not discounting the many other fine interpretations I have read.
Copied from an earlier discussion on this, from a poster whose name has been deleted, there is this on the coldforging of coins, from ALL THE PRETTY HORSES:
In the latter two, they are more involved in fate. In ATPH, Alfonsa talks to John Grady about her father’s theories on coins and fate, that a coin flip is a coin flip, but not everyone’s metaphorical coins are the same. That the metaphysical minter of these coins is perhaps not impartial or perfect and the blanks from which each person’s coin is made from may have irregularities that follow them through life. Grady tells her that the negative things that have come to his life were not his doing, but she doesn’t give that credence. That they happened to him suggests he is a person that these things happen to, perhaps the blank from which the coin of his life was minted from was imperfect in some way.
There are many other interpretations of the Coldforger. What's yours?
submitted by JohnMarshallTanner to cormacmccarthy [link] [comments]


2024.05.15 12:49 PooPooPie67 The Book: A Rift in the Clouds: Ugaritic and Hebrew Descriptions of the Divine by Marjo C.A. Korpel

I’m looking for this highly valuable academic monograph, unfortunately it’s extremely rare not available for purchase and not existing in electronic form. It only seems to be available for borrowing from libraries in Germany and I’m located in the Middle East. Does anyone by any chance has a PDF form of the book?
submitted by PooPooPie67 to AcademicBiblical [link] [comments]


2024.05.15 12:48 Odd_Sun_9889 Precision CNC Machining Service by Norck in USA

Precision CNC Machining Service by Norck in USA
On demand CNC Machining is revolutionizing the manufacturing industry by providing fast, efficient, and cost-effective solutions for producing high-quality parts. With Norck's capabilities in CNC machining, customers can benefit from precision engineering, quick turnaround times, and a wide range of materials to choose from.

Precision CNC Machining Service Capabilities:
· 3-Axis and 5-Axis Milling: Complex geometries, intricate features, and high-precision surfaces.
· Turning: Precision cylindrical parts, shafts, and components with tight tolerances.
· Multi-Axis Mill-Turn Centers: Combining milling and turning capabilities for efficient production of complex parts with Custom CNC Machining.
· Diverse Material Expertise Engineering plastics, aluminum, steels, exotic alloys, and composites.
· Secondary Operations: Deburring, surface finishing, plating, and assembly services with Precision CNC machining.

Precision CNC Machining Service Capabilities:
What are Custom Components?
Custom components are parts designed and manufactured to meet your exact specifications and functional requirements. Unlike off-the-shelf components, they offer:
Precise fit and performance: Engineered to seamlessly integrate into your system and deliver optimal results.
Enhanced functionality: Tailored features and materials to meet the specific demands of your application.
Improved efficiency: Optimized design minimizes weight, cost, or other performance burdens.
Reduced lead times: Norck's expertise allows for efficient production of even intricate custom component manufacturing.

Capabilities for Diverse Injection Molding Needs:
Precision Injection Molding Machines: Tight control over process parameters for consistent, high-quality parts, even with intricate geometries.
Wide Material Selection: Engineering-grade thermoplastics, elastomers, and thermosets. Guidance for balancing performance, environmental requirements, and cost targets.
In-House Mold Design & Manufacturing: Robust tooling for prototyping and mass production, optimized for part quality and mold longevity.
Complex Molding Capabilities: Overmolding, insert molding, thin-wall components, and intricate features for functional and aesthetic needs in injection molding.
Post-Molding Solutions: Secondary operations, finishing, and assembly services to streamline your project and deliver complete components.

Capabilities for Precision Metal Success:
Multi-Axis CNC Machining:
· Complex geometries exceeding the capabilities of standard mills and lathes for Custom metal parts manufacturing.
· Tight tolerances, superior surface finishes, and intricate features on various metals.
· Prototyping and production runs across a wide range of alloys and specialty metals.

Capabilities for Metal 3D Printing Success:
· Industrial-Grade 3D Printers: Utilizing DMLS, SLM, and other metal printing technologies like custom metal 3d printing to produce complex geometries, low-volume parts, and functional prototypes.
· High-Performance Metals: Metal 3d printing services or Printing with stainless steels, tool steels, titanium, nickel alloys, aluminum, and more, ensuring optimal material properties.
· Design & Topology Optimization: Taking full advantage of additive manufacturing's unique capabilities for light weighting, part consolidation, and organic shapes.
· Post-Processing & Finishing: Heat treatments, machining, surface finishing, and assembly services to achieve desired tolerances, performance, and aesthetics.
· Scalable Production: Bridging the gap between prototyping and small to medium batch production while ensuring consistent part quality.

Capabilities for Sheet Metal Fabrication Excellence:
· Integrated Cutting Technologies: Laser, plasma, water jet, and shearing, enabling us to process diverse sheet metals with optimal edge quality and cost-effectiveness for on demand sheet metal fabrication.
· Precision Forming & Bending: Press brakes with advanced tooling to create intricate bends, complex forms, and accurate flanges.
· Welding & Joining: TIG, MIG, spot welding, and other techniques to create robust assemblies and seamless joints.
· In-House Finishing & Coating: Deburring, grinding, powder coating, painting, anodizing, and a range of finishes for aesthetics and corrosion protection.
· Complete Assembly Solutions: Integration of hardware, electronics, and other components to deliver ready-to-use products or sub-assemblies of Sheet metal fabrication.
submitted by Odd_Sun_9889 to CNCmachining [link] [comments]


2024.05.15 12:43 djminger007 The Occupation of CKB cells for RGB++

The Occupation of CKB cells for RGB++
Nice community post here;
https://twitter.com/Web3_Yuuu/status/1789588287184908326
"Today, let’s talk about the occupation of ( $CKB ) of #nervos . Some people who play rgb++ may not understand why CKB needs to be occupied when holding assets and placing orders on Nervos, and then released. This involves the billing mechanism of the blockchain.
In the past, the most common mechanism used to be Ethereum's GAS mechanism. Each transaction required a GAS payment. But in fact, this Gas is used to cover several expenses. The transaction costs mainly include the computational cost of nodes running transactions or smart contracts, the bandwidth cost of nodes transmitting information, and the storage cost of storing content on the chain. Among them, the computational cost and bandwidth cost are one-time, while the storage cost is long-term and is not a set system. In order to simplify understanding, Ethereum uses a unified Gas pricing. Those who have played with the EOS ecosystem will have an understanding of EOS's classified resource billing.
Nervos also separates these two types of fees. On Nervos, one-time fees are charged in the form of transaction fees, and storage also needs to be rented by occupying CKB. Nervos' on-chain information is stored in a structure called Cell. Cell is an enhanced version of Bitcoin UTXO. Similar to Bitcoin UTXO, it can be created and consumed. Unconsumed Cells are called Live Cells, and used Cells are called Dead Cells. All Live Cells need to occupy CKB to rent storage, and the price is 1CKB/kb (not sure if I remember it correctly). When the Cell is used, the occupied CKB will be released.
Take placing an order in the market as an example (Figure 2). The order creates a new Cell, which occupies 215 CKB. When the order is executed or canceled, the Cell becomes a Dead Cell, so the rent will be returned. The same is true for holding Nervos on-chain assets. On-chain assets also correspond to a Cell, so CKB needs to be occupied.
The occupation of CKB does not have to be provided by yourself. For example, when placing an order on an exchange, the occupied CKB can be provided by the exchange, that is, provided by the application side. I think many applications in the future will do this, so as to bring a better user experience.

rgbpp #ckb"

https://preview.redd.it/h4itzschkk0d1.png?width=1200&format=png&auto=webp&s=31a9ad038362641ec0f043195311cb0d00525f91
https://preview.redd.it/0ptpg0aikk0d1.png?width=606&format=png&auto=webp&s=aa4fbe89adcc3721fccbcd8c6d5bf7bdbaca2139
submitted by djminger007 to NervosNetwork [link] [comments]


2024.05.15 12:42 sapphirehealthcarein Different Types of Energy Powder & Energy Drink Products for Boosting Energy

Different Types of Energy Powder & Energy Drink Products for Boosting Energy

Different Types of Energy Powder & Energy Drink Products
Energy powder and drinks are the most popular and highly demanded energy boosters in the market nowadays. They enhance our energy level to the highest instantly and also make our immune system stronger. Energy drink manufacturers are continuously launching multiple different types of energy powder and energy drink products in the market that are rich in metabolism and several high proteins. In this blog, you will get a list of various types of energy powder and drink products that are popular in India and best for your health.

List of Popular Different Varieties of Energy Powder & Drink Products

1. Flavored energy Powder & Drink

Flavored energy Powder & Drink
Flavored energy powder and drinks are the most demanded items now in the market. Gone are the days when people had to tolerate the boring and same taste energy powder or drink. To boost your energy in a fun and tasty way, energy powder & energy drink manufacturers in India are offering different types of energy powder & energy drink products in tasty flavours. They are available in orange, lemon, vanilla and even chocolate flavours.

2. Revival Herbal Drinks

Revival Herbal Drinks
People these days prefer taking herbal energy drinks instead of those chemically produced drinks. That’s why the demand for revival herbal drinks is now the highest among everyone. The 100% natural herbal elements of these energy drinks make them more efficient and a safer option than chemical products. Sapphire Healthcare, the trusted energy drink supplier in India offers 100% natural revival energy drinks at best price.

3. Protinex Nutrition Drink

Protinex Nutrition Drink
Protinex nutrition drink powder is a ready-to-drink beverage mix that generally comes in powder form. You need to mix it in hot water or milk to make an energy drink. Adults can take it to fill their nutritional gaps and boost energy. According to the clinical report, it has more than 34% immuno-boosters.

4. Horlicks

Horlicks
Horlicks has always been the most famous and best-selling energy drink poder among all different types of energy powder & drink products. It comes for both juniors and seniors and is available in vanilla and chocolate flavours. It is a sweet malted milk powder that needs to be mixed in hot milk. Nutrients it has in it instantly get absorbed in our blood and reach every corner of our body.

5. Ensure Plus

Ensure Plus
This is a both an energy drink powder and a protein shake powder. In order to assist patients in achieving or maintaining a healthy weight, ensure Plus offers concentrated calories and protein. Patients who are suffering from malnutrition, or who are losing weight frequently can get best result by taking an Ensure plus.

6. Rasna Instant Drink

Rasna Instant Drink
This is the oldest and the most favourite energy drink of everyone, from kids to adults, among all other different types of energy drink products. Its refreshing orange flavour can make anyone fully refreshed and energetic after a hectic and sweaty summer day. This is the best energy booster for summer.

Get Different Types of Energy Powder & Drink Products from Reliable Energy Powder & Drink Manufacturers in India

Are you looking for a trusted energy powder & drink manufacturer in India? Come to Sapphire HealthCare without looking for anyone else. Our best supply of highly effective energy powder and drink products gained the trust of everyone and gave us a top position in the pharma market. Along with different types of energy powder & drink products, you may also find lots of nutraceutical items from us. We are the no. 1 nutraceutical supplier in India. Give order of your needed energy powder or drink and get them in your required amount and favourite packaging from us at low cost.
Read More: Different Types of Energy Powder & Energy Drink Products for Boosting Energy
submitted by sapphirehealthcarein to u/sapphirehealthcarein [link] [comments]


2024.05.15 12:41 Due_Calligrapher_963 Awaiting Details from Sponsors?

So I’ve submitted my application for SFE for 2nd year and it’s claiming that I still need info form both my sponsors, but my mum has shown me that both her and my dad have already given information. When I click on my SFE it still says Not Complete. They’ve sent me 2 emails already but I’m aware at the bottom it says to disregard it if informations already been sent. A part of me is panicking slightly like I’ve or my parents have somehow fucked up. Anyone else have this issue and know any fixes?
submitted by Due_Calligrapher_963 to UniUK [link] [comments]


2024.05.15 12:41 averagegal-_- Beginner cycling advice

Beginner cycling advice
Just finished my first sprint triathlon and very very new to cycling (<6 weeks). I predominantly trained on an indoor spin bike at my local gym and then inherited my dads old road bike a week before the race. The race was my second time on it. It felt ok, but was slower than I trained for given the incredibly wet conditions. Ended up doing the 20km in 56 minutes and was hoping for sub 50.
Just after advice as a very new cyclist. Mostly about positioning, I’ve read up a fair bit but I find it hard to know whether my form is alright or not without knowing how proper form feels. Definitely got the tri bug and am aiming for an OD in November and 70.3 next May so looking to really dial in on the foundations as the bike is my newest and worst discipline. I also want to make sure I know what I’m doing before I invest in a more expensive bike.
Any and all advice would be greatly appreciated!
submitted by averagegal-_- to triathlon [link] [comments]


2024.05.15 12:40 Vridiantoast Nova Wars tie-in, part 23

Good morning everyone. I’ll have links in a moment since my Reddit drafts aren’t showing up(yippee mobile app). As an aside, I think I can get Friday’s post ready so you guys have that to look forward to.
Once again I return bearing this little conglomeration of words called a short story based in Ralt’s universe. If you missed the First Part, or the last part, I suggest going back and reading that.
————————————————————— “Thinning Mar-gite numbers before ConFed fleet engagement was always a major headache. Our ships were thrown into the grinder, only to be sent back to repair yards after one engagement. The 75th Ghost fleet wasn’t even at half strength and being told to engage the enemy with no extra support to give the attacking fleet a chance. To our credit, anything below an asteroid sized cluster of Mar-gite would uselessly crash headfirst into our formation and get torn apart by fighters alone. The fleet itself could almost handle a moon sized cluster, provided we weren’t ambushed.
What we encountered upon the fleet’s return to conflict was a system that had multiple moon sized clusters spread throughout, and still growing. The outer edge of the system had multiple clusters of mar-gite that would keep our fighters busy while we moved to engage the two moons orbiting the first planet. We took no chances, and made sure to visually confirm that the moons weren’t pretending before entering orbit and starting our landing cycles for ground troops. For the first planet, the troops were able to properly set down and clear the planet. Deep scans were taken as clone marines defended their camps while waiting for the order to move and clear the planet. While Admiral Bannon coordinated that effort, I moved Battlestars and cruisers into a defensive formation, watching and waiting for the inevitable swarm to begin moving toward us, knowing it would be a chaotic mess that would require every ounce of my attention.
It wasn’t until the first underground explosion that our plan came into fruition. Our Vipers had finally landed to re-arm after their multi-hour return trip from the Oort Cloud when the first sign of movement hit my screen. The culprit was the third planet in the system, which looked as if a copy of the planet had taken off from said planet and formed into a massive swarm. As it coalesced into a dwarf planet sized mass the swarms around it began to filter into the mass. What our fleet was facing was a single swarm spread out to the size of Holy Terra itself.
I didn’t hesitate, and gave the order. All ten of my missile tubes were loaded with fusion warheads, and with the turn of two keys, all were sent at once toward the incoming swarm. Shortly after, the Ares did the same, followed by the Artemis class Battlestars sending the two Nukes aboard their ships as well. My first wave of ten Nukes slammed into the outer ring and gave a hole for the second wave of ten. Any pilots spaceborne had already turned away from the flashes as the sixteen missiles from the supporting Artemis classes reached our sensors.
We had shown our hand. None of our ships had any nukes left, and with our creation engines offline to prevent the EM flashes from corrupting them, we had no way to replenish them in battle. I glanced over to my XO, and then to the comms officer. It was time to move forward as a vanguard force.
One Columbia, Ten Artemis, and twelve Valkyrie class Battlestars vanished from orbit in a flash of white, and reappeared only one and a half light seconds away from the enemy. We pointed all guns forward, launched all our Vipers, and began the vicious space battle for the Houpus system.” —————————————————————
(Next chapter link)
Fleet makeup spreadsheet
submitted by Vridiantoast to HFY [link] [comments]


2024.05.15 12:40 jamesmnk Jaw crusher machine manufacturers in india

Jaw crusher machine manufacturers in india
Jaw crusher machines stand as stalwarts within the domain of mechanical apparatus, vigorously forming and refining different materials with their impressive constrain and proficiency. As pioneers in jaw crusher machine fabricating, we at Buildmate take pride in conveying cutting-edge arrangements that engage businesses over India.
· Advancement of Jaw Crusher Machines
Early Beginnings
The beginning of jaw crusher machines dates back to the 19th century, with starting plans centering on smashing rocks and minerals for different mechanical applications. These early emphasess laid the basis for the progressed apparatus we witness nowadays.
· Innovative Headways
Over the decades, jaw crusher innovation has experienced exceptional headways, driven by persistent advancement and a commitment to upgrading execution. From manual operation to advanced mechanized frameworks, the advancement of jaw crusher machines has revolutionized fabric handling over businesses.
Predominant Highlights of Buildmate Jaw Crusher Machines
1. Strong Development
At Buildmate, we prioritize toughness and life span in our jaw crusher machines. Created with premium materials and exactness designing, our machines brag unrivaled quality to resist the harshest working conditions.
2. Tall Effectiveness
Effectiveness is the foundation of our jaw crusher machines. Prepared with state-of-the-art instruments and shrewdly plan, our machines convey unparalleled efficiency whereas minimizing vitality utilization, subsequently optimizing operational costs.
3. Flexible Applications
From mining to development, our jaw crusher machines cater to assorted mechanical divisions with unparalleled flexibility. Whether it's smashing totals, minerals, or reusing materials, Buildmate machines exceed expectations in each application, guaranteeing most extreme utility for our clients.
4. Customization Alternatives
Recognizing the one of a kind needs of each client, we offer broad customization alternatives for our jaw crusher machines. From measure determinations to control setups, our custom fitted arrangements ensure ideal execution custom fitted to particular necessities.
5. Industry Involvement
With a long time of encounter in jaw crusher machine fabricating, Buildmate stands as a trusted title synonymous with unwavering quality and fabulousness. Our demonstrated track record and fulfilled clientele affirm to our unflinching commitment to quality and advancement.
6. Comprehensive Bolster
Our commitment to client fulfillment expands past item conveyance. With a committed group of specialists, we offer comprehensive bolster administrations, counting establishment, support, and specialized help, guaranteeing consistent operations all through the life expectancy of our jaw crusher machines.
Conclusion:
Accomplice with Buildmate for Unmatched Jaw Crusher https://www.buildmate.in/crusher-plants.php
submitted by jamesmnk to u/jamesmnk [link] [comments]


2024.05.15 12:39 ujustgothouserd Host/container isolation

Maybe this has been answered before but I can’t find how to apply what I’ve read to my setup. I have a Debian 12 host running dockeportainer. In portainer I have setup UniFi Network Application and Mongo in one stack l, and a DNS server in its own container. My containers are on a 10.5.71.0/24 network and my host is 10.5.70.0/29. My vlans originate on a hardware firewall, on which I have several other vlans setup for different devices around my house. Going from outside of the docker environment in is easy. What I’m not sure of is how to keep the containers from communicating directly with the host.
The only way I could figure out for putting my containers on a separate vlan was to use vlan tagging in my host machine, so I have eno1.70 and eno1.71 setup in the Debian network configuration. Since that lives on the Debian host though, I’m pretty sure that puts the host on both vlans, which kind of defeats the purpose.
When I remove the configuration for eno1.71 it kills access to my containers from outside.
Is there any way to make this work without assigning an address to my docker host on the same vlan as the containers?
submitted by ujustgothouserd to docker [link] [comments]


2024.05.15 12:37 mohsenous Arabic Letters Are Not Connected

Arabic Letters Are Not Connected
https://preview.redd.it/lxxzv60hik0d1.png?width=824&format=png&auto=webp&s=6279ce4731f1ec6efd7de80749292e26394ce4d3
Fun fact: Arabic letter when connecting to each other they change form somewhat. what you see in front of you are letters in their original form not connecting. To may brain, a native, this is unreadable. it's not like the English language where for e x a m p l e you were able to read example because it's normal, this is not the case in Arabic.
I know this may look like gibberish, well, it is. I, a native Arab, can't read this for the life of me.
Is there an update or something I have to do with the Library for the words to be normal.
submitted by mohsenous to Onyx_Boox [link] [comments]


2024.05.15 12:36 Mammoth_Link_4266 Surgery during visa application

Hi there,
I’m due to undergo a hip replacement in July and have got to interview stage for a role in australia. I’m eligible for a 482 visa and assume the process would start for an application in June should I get the role. I’d make a full recovery by 3 months post op so think there’s plenty of time between visa application, selling house etc.
I just wondered if this would have implications on my visa application. I have read the medical mostly concerns general health associated with ability to work and this shouldn’t be an issue for a desk based role.
Can anyone advise?
submitted by Mammoth_Link_4266 to AusVisa [link] [comments]


2024.05.15 12:32 CastAMillion [AU Time][Monday][Online][5e][Homebrew][LGBTQIA+ Friendly] The new frontiers of exploration are calling you! Will you answer them?

First some info
Hey all, first to clarify a few things. This is an advertisement for 4 players needed for a long-term, homebrew campaign starting at level 6. If you are looking for a purely RAW dnd setting with RAW mechanics and gameplay, this likely isn't something for you. And that's okay. This campaign will be taking place weekly on Monday evenings, AUSTRALIA TIME. If you apply for this campaign, I am going to assume that you will be able to consistently make this schedule. Please familiarise yourself with this as if you are in the USA, it will be early hrs of the morning for you most likely (approximately 2-3am start for those on the East Coast).
I am an experienced GM and I expect a certain commitment from my players. This being a mutual understanding that the more passion we put into the games, the more fun and fulfilment that we will get from them. As a DM, my style is a roleplay and exploration focused game. With the potential for long stretches of combat sessions when narratively appropriate. I run a number of homebrew rules that I believe fit my style of game better. This campaign is in a unique position of exploration over all else. You will need to build characters who have a sense of self as well as a desire to explore. While it is NOT essential or required, taking notes is encouraged given I do like the old lore dump from time to time.
Lastly for the info. Please do not feel intimidated if you are a new player to dnd, wanting your first game. Maybe you are someone who has played Baldur's Gate III and want a shot at the TTRPG version. All are welcome. Please do not apply though if you are under the age of 18, nothing personal, however its not the vibe or themes I'm going for. This campaign will use Discord and Roll20. I'm happy to teach roll20 use, its fairly straight forward to those who haven't used it.
Campaign Premise
Now that stuff is out of the way! Lets have a chat about the kind of story you will be signing your Monday's away to for the indefinite future.
For longer than even Elvish recorded history, around the equator of the world, have been a set of impassable leylines. For millennia, ships, airships and any who attempt the treacherous crossing of this equatorial barrier into the South has never been heard from again. All forms of divination and teleportation magic has proved futile at providing witness to the other side of the great divider. Until 5 years ago. 5 years prior to the event of the campaign, the 3 largest nations to the North developed a device called "The Arcane Anomaly Pacifier," (TAAP). Which is a ring of three large towers that every 6 months, can stabilise the leylines in a small enough area over the ocean to provide safe passage for a fleet of ships. The first of these crossings was named "The Exodus."
Since then, 9 other crossings have been made into the new lands. You, the party find yourselves on the 10th crossing. Leaving from whatever life you had before, into new prospects of employment. Were you running? Hiding maybe? Or even someone down on their luck in search of new horizons! You have accepted the job of Expedition Security for an eccentric Gnomish scientist named "Odana Gerrul." She believes that there is more to this southern wasteland than meets the eye.
Rumours of an artifact with the power to control the flow of magic run rampant within the new colonies as ruins of who came before are starting to be uncovered. Will your party be the ones to unlock the secrets of the new world? Or will the mystery swallow you up whole?
How to apply
Thankyou newfound friend for sifting through my word vomit. Now if you feel like this game may still be for you, here's how you can go about letting me know! Please fill out the following google form as accurately as you can. (Extra consideration will be put into those applicants who go into a bit more detail) I'll contact you further if I believe that you would be a good fit for the group. Any questions, please comment below.
https://docs.google.com/forms/d/e/1FAIpQLSfC3mYtky9b9_RknQzS9Y4g0rLkDGmzrjhtF9zXfucUdpwccw/viewform?usp=sf_link
I look forward to hearing from you.
submitted by CastAMillion to lfg [link] [comments]


2024.05.15 12:31 aprills_04 LAST DAY URGENT HELP

So, i was editing my form ( i already submitted my form in april ) and there were few errors like in the section of dob we have to upload 10 class marksheet but at that time i mistakenly uploaded 12 class marksheet and then i am reuploading the new 10 one and then save it , then i enter the captcha code and view the application form it is still showing me the 12 class marksheet , this is the first problem and second one is the same thing when i am changing my category from ews to general and then save it and again viewing the application form it is still showing my category as ews and there is not even an option to delete my declaration form which i uploaded in the ews one, i multiple times called the helpline number but no one is answering , what should i do , will in future the correction window will open or not because since morning i am trying to edit my application form but it is not showing the updated application certificate .
submitted by aprills_04 to IPUniversity [link] [comments]


2024.05.15 12:31 finchesandlilies How do I (32F) deal with my friend (33nb) being mean?

I (32F) have a friend (33nb) who I've known for 15 years. We never lived close to each other and our contact over the years was rather lose with us keeping up with each other's lives over Twitter and me visiting them every two years or so. In all those years we got along well and never had an argument. They once told me that no matter how long we go without talking, they always feel welcome by me, and I used to refer to them as "one of my favourite human beings".
This changed when we started to talk more regularly three years ago. They had started playing DnD and had asked me to join their new campaign, which I did, and which lead to us spending several evenings a week hanging out over on Discord in a voicecall with two other friends of theirs.
Over time I realised that they were not as nice to me as they used to be. Making fun of me, making wrong assumptions about me, just generally often not being very nice to me. Early on they reached out twice, saying they thought they were overstepping and being too mean to me. I told them I appreciated them reaching out but did not say much more to it. I know that's on me, I should have made it very clear at that point how their comments made me feel. I don't handle conflict well and failed to make my position clear when they reached out. So instead of saying "Yes, you are right, your behaviour really hurts me. Please stop." I basically said "Thank you for reaching out about this, I appreciate it." Probably not very helpful.
And then it just kept getting worse. It got to a point where I constantly felt like I was walking on eggshells, that no matter what I said they would read something into it and make assumptions about me that weren't true. They are a very eloquent person whereas I am not and I feel like I have to be super careful about what I say because they will understand it in a different way from how I meant it. I don't generally have a problem with misunderstandings, it's the way they assume things about me that I find hurtful and the way they lash out at me that I find difficult to handle. They have a very short fuse and will immediately raise their voice, which I don't deal with well. And the constant accusations are getting to me. When someone says something that seems off to me or seems to contradict what they had said earlier, the last thing I suspect is that this person is trying to deceive me. Especially not if they're my friend. I will think I misheard or they phrased it weirdly or we use a certain word in different ways... basically I will first go through any possibility that is not about the other person purposefully trying to be hurtful or deceiving. With them it's like no matter what I say they will come to the worst possible conclusion. To me it often seems like they have a certain interpretation of things and to them that is the only valid interpretation.
For example:
I told them how I was really struggling with the fact that with working full-time and my friends all living in different cities, I rarely get to go out and actually do something with the people I like and how my whole life had turned into "working, sleeping, working, sleeping..." and how this was really taking a toll on me.
A couple of days after I told them that we were trying to look for a date for a DnD session and I told them I wasn't available on the date they suggested because I had to travel to my hometown because of a family member's birthday. To which they mocked me over how I was "always socialising" which then in turn made me upset and I told them how untrue that was and that never getting to socialise was currently my whole problem. To which they raised their voice and said that I was constantly socialising and accused me of gaslighting them for saying otherwise. I took a look at my calender in which I note down appointments and social stuff and told them how I could literally see in my calender that I had met up with friends TWICE in the past six weeks.
Eventually it turned out that we use the term "socialising" very differently. To me socialising means "voluntarily doing things with people that I like". To them apparently socialising means anything one does with other people, so family meetings that you go to despite not really wanting to but feel obliged to attend fall under socialising as well as any kind of appointment.
I often get the impression that we define things differently and when I say something that doesn't make sense to them they immediately feel like I'm trying to manipulate them or am questioning their perception of things, and they they lash out and attack me, which in turn hurts me. Whether this is actually what is happening, I don't know... it's just how the way it seems to me sometimes.
Some other examples are how they called me a "capitalistic bunny" for saying that I don't hate my job and how my manager is very nice. Because apparently being glad about the fact that something that I have to do to literally be able to provide for myself is not as bad as it could be means that I love captalism. (Fun fact: they were working for Amazon at that point. Which I guess is okay as long as you mention three times a day how much you hate it there.) Or how they accused me of thinking my own experiences are universally applicable as a response to me literally saying: "I noticed that every time I visited you it was a lot colder than where I live. So I was wondering, is it generally colder in your area or was it a coincidence that it was colder every time I visited so far?"
I don't know how to talk to them about how their behaviour hurts me when they misinterpret everything that I say and immediately lash out at me or withdraw and spend the next few hours thinking everyone hates them.
It's not even that I think they don't care about hurting me or that they wouldn't be willing to change. It's that them not saying those things out loud anymore would not change the fact that they still think them. Them keeping these thoughts to themselves would not mean they don't think that way anymore, just that they are not saying these things out loud anymore.
I think the only possible way to fix this would be to talk to them. But I don't know how to fix something with communication when communication is the whole problem. So I don't feel comfortable confronting them and am looking for other ways to change my own behaviour to make this situation more tolerable. I don't know how to make my boundaries clear and clearing up misunderstandings without them feeling attacked and lashing out at me.
Over the past few weeks I've started to withdraw and stopped reaching out to them. And I've been feeling so much better. I got to spend more time with some other friends again and realised that it's possible to spend several hours with other people without constantly having to worry about how what I say might be understood, without constantly feeling judged and without getting mocked or my actions being interpreted in the worst and most inaccurate way possible.
I feel guilty for feeling this way, like I'm making this person out to be the most insufferable person ever and like I'm just dropping them for getting too exhausting to deal with. I feel like if I were a good friend I would reach out and try to fix it. I'm not even giving them a chance to explain their point of view. Maybe they see all this very differently, maybe to them I am the one who is hurting them. I'm just so tired of not being able to be around this person without ending up feeling bad or having to worry about making them feel bad.
Tl;dr I feel like my friend is treating me very poorly and I don't know how to deal with it. I don't feel comfortable confronting them about it but don't know how to act in this situation. I want to fix it without confronting them and don't know how.
submitted by finchesandlilies to relationship_advice [link] [comments]


2024.05.15 12:30 lussaa How and how difficult is it to get a place in creche?

Hi, How difficult is it to get a place in public nursery/creche? I read somewhere that only like 50% of the kids get a place. Is it true? (We will move to either Grenoble or Antibes, not sure yet where.) And what are the conditions of getting a place? Do both parents need to work? Until when are you supposed to send your application?
Merci!
submitted by lussaa to ParentingFR [link] [comments]


http://rodzice.org/